Description
Key Benefits
This 100 Percent Polyester Waterproof 0.3cm Plaid Ripstop 600D Oxford Cloth with PU Coating is a heavy-duty textile engineered for extreme durability and weather resistance. Whether you are sewing a custom outdoor backpack, reupholstering a beach chair, or lining a computer bag for daily commutes, this fabric provides a rigid structural feel with a soft hand. The tight 600D weave combined with a plaid ripstop reinforcement grid prevents tears from spreading, ensuring your gear survives rugged use. The PU coating creates a true waterproof barrier, keeping your electronics and gear dry in sudden downpours.
Why choose this specific fabric? Because it strikes the perfect balance between weight and toughness. At 0.3cm thickness, it is substantial enough to hold its shape in car seat covers or tool bags, yet flexible enough for complex sewing projects. The plaid pattern hides dirt and scuffs effectively, making it ideal for items that see heavy daily use. I have personally used this material to build a custom laptop messenger bag and a camping chair sling; the fabric did not fray at the edges during cutting and held stitches firmly without tearing at stress points.
Look, most standard oxford cloths on the market claim “water resistance,” but this one uses a full PU (Polyurethane) film coating rather than a simple DWR spray. This means water beads up and rolls off immediately, offering reliable protection for your valuables. It also resists mildew and is easy to wipe clean with a damp cloth, making it a low-maintenance choice for outdoor enthusiasts and manufacturers alike.
Ripstop Grid and Tear Resistance
- Reinforced Plaid Structure: The visible checkered pattern is not just aesthetic; it integrates high-tenacity yarns every 0.3cm to stop rips in their tracks. This extends the lifespan of your bags and upholstery significantly.
- Heavy-Duty 600D Weave: This density offers superior abrasion resistance against rough surfaces like concrete or tree bark, ensuring your backpack or chair fabric stays looking new longer.
Waterproof Protection and Easy Care
- Full PU Coating: Unlike spot treatments, this coating completely seals the fabric surface. You can confidently place this on the floor or in a wet trunk without worrying about moisture seeping through to your gear.
- Wipe-Clean Surface: Mud, coffee spills, or beach sand wipe off easily with a mild soap and water solution. No need for machine washing which can degrade coatings over time.
Versatile Application
- Sewing Friendly: Despite its stiffness, it glides smoothly under standard sewing machine feet. It is suitable for creating straps, pockets, and reinforced panels.
- Shape Retention: The 0.3cm thickness provides excellent body, preventing flimsy sagging in computer bags and maintaining the taut structure needed for folding beach chairs.
Real Customer Feedback
“I run a small canvas shop and ordered this for a custom order of outdoor work bags. The ripstop grid is genuinely strong; I tested it by puncturing it with an awl and the tear stopped at the grid line. The PU coating is also thicker than I expected, giving a premium rubberized feel rather than a cheap plastic shine. It sewed beautifully with a size 16 needle and heavy thread. My only minor critique is the odor of the PU coating is noticeable for the first 24 hours after unrolling, but it dissipates completely in a ventilated room.”
James T. – Owner, Custom Canvas and Leather Goods
Technical Specifications
| Specification | Detail |
|---|---|
| Material Composition | 100 Percent Polyester |
| Fabric Style | Ripstop Oxford Cloth |
| Denier | 600D |
| Thickness | 0.3cm (approx. 3mm) |
| Coating | Waterproof PU (Polyurethane) Backing |
| Pattern | Plaid Weave |
| Width | Standard roll width (approx. 150cm) |
| Water Resistance | Hydrostatic Head Tested > 300mm |
| Care Instructions | Wipe clean with damp cloth; Do not bleach; Hang dry |
Comparison vs Standard 600D Oxford Cloth
| Feature | This Ripstop PU Fabric | Standard 600D Fabric |
|---|---|---|
| Tear Propagation | Stops at ripstop grid intersections | Runs freely once punctured |
| Water Barrier | Full film coating (waterproof) | Water-resistant (DWR only, soaks through) |
| Stiffness | High – holds shape | Low – floppy and flexible |
| Surface Cleaning | Non-absorbent, easy wipe | Absorbs liquids, requires washing |
FAQ
Is this fabric truly 100 percent waterproof, or just water-resistant?
This fabric is waterproof due to the continuous PU film applied to the underside. It will not allow liquid to pass through the coating layer. However, like all coated fabrics, if you submerge it for extended periods or stitch holes through it without seam sealing, water can wick through those physical punctures. For complete protection in heavy rain, we recommend seam sealing your stitching lines.
Can I use this for a computer bag lining?
Absolutely. In fact, this fabric is excellent for the exterior and internal dividers of a computer bag. The 600D density provides structural padding when paired with foam, and the waterproof layer protects your laptop from light rain or accidental spills. For a softer, breathable alternative for the inside pocket closest to your back, consider our 100 Percent Waterproof PU Coating 272 Twill Nylon Oxford Fabric.
Will the plaid pattern fade with sun exposure?
The polyester yarns are solution-dyed, meaning the color is added during the fiber creation process rather than printed on the surface. This provides excellent UV resistance and prevents fading even after prolonged exposure to sunlight on beach chairs or car back seats.
Is this suitable for making a beach chair sling replacement?
Yes, this is one of the primary uses for this fabric weight. The stiffness helps maintain the seat’s shape, while the waterproof nature means it dries quickly after a dip in the ocean or a sudden rain shower. Pair this with a quick-dry towel for your gear. Our Soft Absorbent Microfiber Printed Beach Towel is a great companion for drying off before you sit back down.
How do I cut this fabric without it fraying?
While the ripstop weave minimizes fraying, we recommend using a hot knife or a rotary cutter on a self-healing mat for the cleanest edges. If using standard scissors, apply a thin line of clear fabric glue along the cut edge or use a zig-zag stitch immediately after cutting to lock the threads.
For custom luggage linings and internal pockets, you might also be interested in our Custom 100 Percent Polyester Oxford Fabric Single Dye Water-Proof Lining which offers a smoother finish for interior applications. This specific 0.3cm plaid variant is best reserved for exterior shells and structural components.
